/standards · MOSX-MOD profiles
Module Standards
MOSX module profiles define what "the same body" means across designs: a published connector, thermal envelope, calibration record format, burn-in requirement, test signature, and per-serial traceability. This is how the portal becomes a standardization engine, not just a download site.
Rugged Industrial Sensor Module
Standard rugged module for industrial sensing applications. Defines package, connector, thermal envelope, and traceability format.
- package_format
- DIN-rail 22.5mm, IP54 enclosure
- connector
- M12 A-coded, 5-pin
- power_input_range
- 9–36 VDC
- thermal_envelope
- −40 °C to +85 °C ambient
- communication
- CAN 2.0B + RS-485
- calibration_record
- signed JSON per serial
- burn_in_requirement
- 168 hr @ 85 °C, V_max + 10%
- test_signature
- SHA-256 over final-test log
- traceability
- wafer-lot → die → serial → module
Automotive Control Interface Module
Automotive-grade module profile for CAN-FD / LIN interface boards. Aligned with IATF 16949 supplier expectations.
- package_format
- MQS housing, 18-pin
- connector
- MQS 18-position sealed
- power_input_range
- 6–18 VDC
- thermal_envelope
- −40 °C to +105 °C
- communication
- CAN-FD, LIN 2.2
- calibration_record
- n/a (no calibration)
- burn_in_requirement
- 96 hr @ 105 °C
- reliability
- AEC-Q100 Grade 1 target
ESC 4×4 Tile Evaluation Module
Reference evaluation module for the ESC 4×4 Tile design. Used as a default carrier for MPW-returned die.
- package_format
- 100×80 mm carrier PCB
- connector
- Header 2×20, 2.54 mm
- power_input_range
- 5 V USB-C or 12 V barrel
- thermal_envelope
- 0 °C to +70 °C bench
- communication
- USB-CDC, CAN, SPI headers
- documentation
- reference design + Gerbers in package
Power Monitoring Module
DIN-rail-mountable power monitor for industrial panels. Used as the reference build path for OEM qualification trials.
- package_format
- DIN-rail 35mm, IP30
- connector
- Phoenix 5.08 mm pluggable
- power_input_range
- 85–264 VAC / 120–375 VDC
- thermal_envelope
- −25 °C to +60 °C
- communication
- RS-485 (Modbus RTU)
- calibration_record
- current/voltage gains signed at FT
Motor-Control Pre-Driver Module
Pre-driver carrier for BLDC and PMSM motors up to 200 V. Designed for UAW-shop retrofit qualification.
- package_format
- 120×100 mm aluminum-clad carrier
- connector
- screw terminals + ribbon control
- power_input_range
- 24–200 VDC
- thermal_envelope
- −20 °C to +85 °C, derated above 60 °C
- communication
- CAN + isolated UART
- reliability
- industrial_rugged profile